Sno-Way Plows & Spreaders Products
Plows
Revolution™ HD Series
Fits 3/4 Ton To Class
5 Trucks
The Revolution™ HD
Series Snow Plow is designed to provide maximum snow moving flexibility and
capacity for 3/4 ton to Class 5 trucks. This 10 foot wide, 29 inch tall plow is
designed to flat out move more snow for the most demanding professional.
The patented fully
controllable, independently moveable 13-1/2" wide wings allow you to make
your Snow Plow a full open plow to a box end plow in a matter of seconds. While
other “expandable” plows have wings that move out and forward 20 degrees, the
Revolution HD allows the operator to move the independent hydraulic wings to
tackle any difficult situation.
When you combine the
fully hydraulic Snow Plow independent wings with the ability to also angle the
plow, the operator will fit through the tightest areas while still capturing up
to 6.1 cubic yards of snow. Also included in this beast of a machine is the
Down Pressure hydraulic system which delivers an additional 250 pounds of down
force on the cutting edge with the push of a button.
Match this plow with the
Pro-Control – wired or wireless – It provides three Macro controls allowing the
skilled operator a memory function that he can set for any repeated operation –
talk about efficiency!
The Revolution™ HD
Series snow plow with patented Down Pressure® on a one ton or larger truck will
cut your plowing time in half easily when compared against any plow in the
market.
Back-dragging,
scraping, scooping, windrowing, capturing, moving, pushing, cleaning and
ultimate efficiency are what you get with the Revolution HD Series snow plow
from Sno-Way. No other plow on the planet has this capability and provides this
ultimate control.
Features:
Patented Ground
Hugger™ Blade Design
- Keeps Plow on the Ground
Tube Steel/Tab-Slot
and Lock Construction
- Engineered for Load Force Absorption
- Engineered to Last
Fast-Force Hydraulic
System
Pre-Drilled Top Blade
Rail
- Allows for E-Z Installation of E-Z Fit Deflector
150° Hydraulic Wing
Rotation
- Infinite Snow Moving Adjustability
Triple-Coat Protection
- Zinc phosphate wash
- Automotive E-Coat primer
- Military grade powder coat
Down Pressure®
Hydraulics System
- Scrapes clean forward and back dragging
- Increases snow-moving efficiency 30%
EIS™ – Energy
Interruption System
- Down-time reduction
- Corrosion elimination
- Plug and play design
32 Contractor Series
Fits 3/4 Ton to Class 5 Trucks
The 32 Contractor Series snow plow offers snow
removal professionals a rugged straight plow that combines close tolerance
manufacturing, industry leading hydraulics and patented electronics for long
term performance.
This 32 inch high snowplow blade is
constructed with a 12 gauge steel welded moldboard designed with slot and lock
engineered components. The tallest straight snow plow series in the Sno-Way
line is available in 8’6”, 9’0” and 10’0” lengths. The 8’6” and 9’0” plows are
designed with custom engineered mounting brackets designed to accept the
patented E-Z Switch™ accessory wings.
While plowers are a rough and tough crew, they
do like their plows to look good and Sno-Way delivers with the first-ever
Triple-Coat Protection; zinc phosphate wash, automotive E-Coat primer and
military grade powder coat combination. The Triple-Coat Protection System
delivers a surface that is resistant to penetration by salt, sand, stones or
any other aggregate material.
This 32 Contractor Series Straight snow plow
is made for the professional who needs to get the job done. This snowplow comes
standard with our patented Down Pressure® hydraulic system allowing the savvy
contractor to add 250 lbs of down force at the touch of a button. The Down
Pressure hydraulics actually allows the contractor to clean better and spread
less salt. Spreading less salt means spending less on materials and spending
less on materials means more money in your pocket. More money in your pocket is
what the savvy contractor is after.
Add the optional E-Z Switch™ wings and you
will double the capacity of the 32 Contractor making you the smartest player in
the business. Sno-Way engineers solutions that make sense and the E-Z Switch™
wings make sense for those wanting to double their snow-moving capabilities
without destroying the integrity of the base blade system.
The E-Z Switch™ 3” box wings more than double
plowing capacity and the 9” wings provide the large scale contractor up to 3
times the snow removal equipment in just seconds. Simply stated, we designed
the 32 Contractor snow plow to work with the wings instead of the wings being
an afterthought. So, add the wings, move more snow and crush the competition.
Features:
Patented Ground
Hugger™ Blade Design
- Keeps Plow on the
Ground
Tube Steel/Tab-Slot
and Lock Construction
- Engineered for Load Force
Absorption
- Engineered to Last
Fast-Force Hydraulic
System
Pre-Drilled Top Blade
Rail
- Allows for E-Z
Installation of E-Z Fit Deflector
Triple-Coat Protection
- Zinc phosphate wash
- Automotive E-Coat primer
- Military grade powder coat
EIS™ – Energy
Interruption System
- Down-time reduction
- Corrosion elimination
- Plug and play design
Custom Designed to
Accept the E-Z Switch™ Wings
- More than Doubles Snow
Moving Capacity
Quick Jack Plow Stand
- Easy and Fast to Operate
29R Series
Patented Ground Hugger™
Blade Design
- Keeps Plow on the Ground
Tube Steel/Tab-Slot and Lock Construction
- Engineered for Load Force Absorption
- Engineered to Last
Pre-Drilled Top Blade Rail
- Allows for E-Z Installation of E-Z Fit Deflector
Patented Shock-Killer™ Trip Return System
Drive in Truck Mount System
Triple-Coat Protection
- Zinc phosphate wash
- Automotive E-Coat primer
- Military grade powder coat
Down Pressure® Hydraulics System
- Scrapes clean forward and back dragging
- Increases snow-moving efficiency 30%
EIS™ – Energy Interruption System
- Down-time reduction
- Corrosion elimination
- Plug and play design
29VHD Series
Fits HD 3/4 Ton to Class 5 Trucks
The 29VHD is the top of the line in Vee Plow technology. The unique Ground Hugger blade design keeps the plow on the ground to clean more snow which is rather difficult for a v-plow.
To enhance cleaning, Sno-Way invented the patented MaxADJUST™ Leveling System - which is a single adjusting arm blade leveling system. This simply allows the operator to adjust the center hinge for perfect plowing alignment and eliminate a snow trail.
Double acting wing cylinders are specifically designed to provide maximum force in the forward or back hydraulic position. These optimized cylinders keep the plow wings from being forced open in heavy snow and allow for superior vee-plow back dragging in tight quarters.
With the Down Pressure® Hydraulic System as standard equipment, this plow will clean better and cut 30% of your plowing time. The Down Pressure Hydraulics add over 250 pounds of down force on the cutting edge which is a first in the industry and scrapes clean forward and maximizes back dragging.
While V-Plows are infamous for having obstacle tripping difficulty, the Sno-Way 29VHD V-Plow handles obstructions with ease utilizing a patented Shock Killer™ Trip Return System which reduces blade return shock to the truck and the driver.
Sno-Way pays attention to even the smallest details to be sure operators can maximize performance and efficiency. The tube steel tab-slot and lock construction ensures component fit and proper welding while the pre-drilled top rail allows the contractor to easily add the E-Z Fit Deflector in under a minute.
As if this plow wasn’t big and bad enough, Sno-Way custom designed a system to allow the mega-contractor to add optional E-Z Switch™ Wings to increase the load-moving capacity. This accessory wing system requires no drilling and will not destroy the integrity of the blade.
The EIS™ – Energy Interruption System is a standard plug and play electrical system on this snow plow providing down-time reduction and limiting corrosion.
Superior Paint for Corrosion Resistance is achieved through a Triple-Coat Protection System; zinc phosphate wash, automotive E-Coat primer and military grade powder coat combination. The Triple-Coat Protection System delivers a surface that is resistant to penetration by salt, sand, stones or any other aggregate material.
Features:
Patented Ground Hugger™ Blade Design
- Keeps Plow on the Ground
Tube Steel/Tab-Slot and Lock Construction
- Engineered for Load Force Absorption
- Engineered to Last
Fast-Force Hydraulic System
Pre-Drilled Top Blade Rail
- Allows for E-Z Installation of E-Z Fit Deflector
Patented Shock-Killer™ Trip Return System
Double Acting Wing Cylinders
Triple-Coat Protection
- Zinc phosphate wash
- Automotive E-Coat primer
- Military grade powder coat
Down Pressure® Hydraulics System
- Scrapes clean forward and back dragging
- Increases snow-moving efficiency 30%
EIS™ – Energy Interruption System
- Down-time reduction
- Corrosion elimination
- Plug and play design
Patented MaxADJUST™ Leveling System
29HD Series
Fits HD 1/2 Ton to 1 Ton Trucks
The 29HD has all of the
desirable characteristics in an extreme-duty plow: High-strength steel
moldboard and A-frame construction; fast, responsive hydraulics; and optimized
blade geometry for exceptional snow-rolling performance.
The 29 inch tall blades
are available in 7'6" and 8'0" lengths with custom designed mounting
brackets that accept two accessory wing options without destroying blade
integrity. The 29HD is able to be fit to a wide range of plow trucks due to extensive
use of high strength steels and efficient manufacturing design.
All Sno-Way plows
utilize the Drive-In mounting system that ensures maximum road clearance and
simple, fast mounting steps. Mount components are specifically designed to
match the plow series to the truck type it is engineered for. This ensures
proper structural integrity for the plow and for the truck ensuring greater
equipment functionality.
With the optional Down
Pressure® Hydraulic System, this plow will clean better and cut 30% of your plowing
time. The Down Pressure Hydraulics add over 250 pounds of down force on the
cutting edge which is a first in the industry and scrapes clean forward and
maximizes back dragging.
Increased uptime is
achieved with the patented EIS (Electrical Interruption System) which
eliminates any of the typically troublesome relays by creating a closed-loop
truck to plow light connection. All plow contractors know that the elimination
of these relays will allow them a more dependable plow.
Plowers like their plows
to look good and Sno-Way delivers with the first-ever Triple-Coat Protection
System; zinc phosphate wash, automotive E-Coat primer and military grade powder
coat combination. The Triple-Coat Protection System delivers a surface that is
resistant to penetration by salt, sand, stones or any other aggregate material.
Sno-Way pays attention
to even the smallest details to be sure operators can maximize performance and
efficiency. The tube steel tab-slot and lock construction ensures component fit
and proper welding while the pre-drilled top rail allows the contractor to
easily add the E-Z Fit Deflector in under a minute.
Features:
Patented Ground Hugger™ Blade Design
- Keeps Plow on the Ground
Pre-Drilled Top Blade Rail
- Allows for E-Z Installation of E-Z Fit Deflector
Patented Shock-Killer™ Trip Return System
Robust Full-Load Trip Springs
Drive in Truck Mount System
Triple-Coat Protection
- Zinc phosphate wash
- Automotive E-Coat primer
- Military grade powder coat
EIS™ – Energy Interruption System
- Down-time reduction
- Corrosion elimination
- Plug and play design
Custom Designed to Accept the E-Z Switch™ Wings
- More than Doubles Snow Moving Capacity
Down Pressure® Hydraulics System (Optional)
- Scrapes clean forward and back dragging
- Increases snow-moving efficiency 30%
29THD Series
Fits HD 1/2 Ton to 1 Ton Trucks
The 29THD is a Trip Edge plow that is built to
withstand brutal winters. At 29 inches tall and available in 7''6" or
8''0" lengths, the 29THD has a custom engineered 6 inch trip edge
supported by 4 compression springs. The fully adjustable compression springs
are tuned to trip only when necessary so the snow load is not lost. Topping off
the 29THD trip design is the patented Shock Killer system that minimizes
violent shocks to the plow, truck and operator.
With the Optional Down Pressure® Hydraulic
System as standard equipment, this plow will clean better and cut 30% of your
plowing time. The Optional Down Pressure Hydraulics add over 250 pounds of down
force on the cutting edge which is a first in the industry and scrapes clean
forward and maximizes back dragging.
As a professional plower, you depend on the
steel in front of your truck to move your business ahead. The steel blade on
the Sno-Way 29THD series is kept slick and looking good with the Triple-Coat
Protection; zinc phosphate wash, automotive E-Coat primer and military grade
powder coat combination. The Triple-Coat Protection System delivers a surface
that is resistant to penetration by salt, sand, stones or any other aggregate
material.
Contractor uptime is kept optimal with the
patented EIS (Electrical Interruption System) which eliminates any of the
typically troublesome relays by creating a closed-loop truck to plow light
connection. All plow contractors know that the elimination of these relays
means a full season without surprise electrical headaches.
Sno-Way pays attention to even the smallest
details to be sure operators can maximize performance and efficiency. The tube
steel tab-slot and lock construction ensures component fit and proper welding
while the pre-drilled top rail allows the contractor to easily add the E-Z Fit
Deflector in under a minute. The patented E-Z Fit Deflector keeps snow from
flying into the windshield on even the toughest plowing nights.
Sno-Way''s 29THD Trip Edge Plow is designed to
fit a wide range of work trucks using high strength steels and time-tested
blade geometry. Fit More, Plow More, Scrape More, and Trip Less.
Features:
Patented Ground
Hugger™ Blade Design
- Keeps Plow on the Ground
Pre-Drilled Top Blade
Rail
- Allows for E-Z
Installation of E-Z Fit Deflector
Patented Shock-Killer™
Trip Return System
Drive in Truck Mount
System
Triple-Coat Protection
- Zinc phosphate wash
- Automotive E-Coat primer
- Military grade powder coat
EIS™ – Energy
Interruption System
- Down-time reduction
- Corrosion elimination
- Plug and play design
Custom Designed to
Accept the E-Z Switch™ Wings
- More than Doubles Snow
Moving Capacity
Down Pressure®
Hydraulics System (Optional)
- Scrapes clean forward and
back dragging
- Increases snow-moving
efficiency 30%
Robust Compression
Trip Springs
26R Series
Features:
Patented Ground
Hugger™ Blade Design
- Keeps Plow on the Ground
Pre-Drilled Top Blade
Rail
- Allows for E-Z Installation of E-Z Fit Deflector
Patented Shock-Killer™
Trip Return System
Drive in Truck Mount
System
Triple-Coat Protection
- Zinc phosphate wash
- Automotive E-Coat primer
- Military grade powder coat
Down Pressure®
Hydraulics System
- Scrapes clean forward and back dragging
- Increases snow-moving efficiency 30%
EIS™ – Energy
Interruption System
- Down-time reduction
- Corrosion elimination
- Plug and play design
26 Series
Fits 1/2 Ton Trucks
Sno-Way designed the 26 Series Snow Plow specifically for the ½ ton truck
market. 1/2 ton trucks are the choice for entry level and economically-minded
plow contractors that demand maximum work truck flexibility. Sno-Way builds the
26 series specifically for the Ford F150, Chevy Silverado 1500, Ram 1500,
Toyota Tundra, Dodge 1500 and GMC Sierra 1500 trucks.
The 26 has all of the same standard features as Sno-Way's commercial plow
line without the extra weight: High-strength steel FlexForce™ frame
construction, heavy-duty A-frame, patented EIS™ lighting technology, direct
linkage lifting system and an ultra-responsive hydraulic package. The ?" x
6" high carbon steel cutting edge is standard, to reduce wear and protect
the blade.
The 26 inch tall blades are available in 6'8" and 7'6" lengths
with custom drilled top rail designed to accept the patented EZ-Fit Snow
Deflector. The high strength steel blade on the Sno-Way 26 series is kept
looking good and slick with the Triple-Coat Protection; zinc phosphate wash,
automotive E-Coat primer and military grade powder coat combination. The
Triple-Coat Protection System delivers a surface that is resistant to
penetration by salt, sand, stones or any other aggregate material.
All Sno-Way plows utilize the Drive-In mounting system that ensures
maximum road clearance and simple, fast mounting steps. Mount components are specifically
designed to match the plow series to the truck type it is engineered for. This
ensures proper structural integrity for the plow and for the truck ensuring
greater equipment functionality.
With the Down Pressure® Hydraulic System as optional equipment, this plow
will clean better and cut 30% of your plowing time. The Down Pressure
Hydraulics add over 250 pounds of down force on the cutting edge which is a
first in the industry and scrapes clean forward and maximizes back dragging.
Turn your ½ ton truck into a snow moving machine with the 26 Series Snow
Plow.
Features:
Patented Ground Hugger™
Blade Design
- Keeps Plow on the Ground
Pre-Drilled Top Blade
Rail
- Allows for E-Z Installation of E-Z Fit Deflector
Patented Shock-Killer™
Trip Return System
Robust Full-Load Trip
Springs
Drive in Truck Mount
System
Triple-Coat Protection
- Zinc phosphate wash
- Automotive E-Coat primer
- Military grade powder coat
EIS™ – Energy
Interruption System
- Down-time reduction
- Corrosion elimination
- Plug and play design
Down Pressure®
Hydraulics System (Optional)
- Scrapes clean forward and back dragging
- Increases snow-moving efficiency 30%
22 Series
Fits Downsized Trucks and SUV's
Whether you’re looking
to plow out your driveway, helping out a neighbor or two, or upfitting a
downsized vehicle in your fleet, Sno-Way 22 Series plows give you big blade
results in a compact snow plow package.
Two blade sizes –
6'-8" and 7'-6" – each 22" high, help you meet your non-commercial
plowing application head-on. High-strength steel FlexForce™ frame construction,
patented EIS™ lighting technology, direct linkage lifting system and an
ultra-responsive hydraulic package are all combined in a small performance
package in the 22 Series.
Sno-Way designed the 22
Series Snow Plow specifically for trucks and SUV's smaller than ½ ton trucks.
Producing a durable, fully functional plow for smaller trucks is a specialty of
Sno-Way. In 1978, Sno-Way built the first plow to fit a Subaru Brat and has
been the only plow company to dominate this sector of the market since.
Engineers have perfected
the appropriate use of various types of high strength steels in the right
combination of components to keep strength up and weight down. The 22 series
plow blade can be seen from a distance as it is a steel frame with
polycarbonate blade face. The original intent of this design was as a
see-through and impenetrable surface but today it is used to keep weight down
and structural integrity high.
All Sno-Way plows are
offered standard with high-intensity plow lights that are switched
automatically from truck to plow with the patented EIS system. The EIS
(Electrical Interruption System) eliminates any of the typically troublesome
relays by creating a closed-loop truck to plow light connection.
The Sno-Way hydraulic
system is specifically engineered for the 22 series to allow for fast action
and durable hydraulic performance. Custom designed cylinders, fittings, hoses
and internal components are married with the optimal geometry design to create
the ultimate small plow system.
Features:
Patented Ground Hugger™ Blade Design
- Keeps Plow on the Ground
Patented Shock-Killer™ Trip Return System
Robust Full-Load Trip Springs
Ultra-High Strength Steel Components
Polycarbonate Blade Skin
Special Design Trip Springs
Drive in Truck Mount System
Triple-Coat Protection
- Zinc phosphate wash
- Automotive E-Coat primer
- Military grade powder coat
EIS™ – Energy Interruption System
- Down-time reduction
- Corrosion elimination
- Plug and play design
Down Pressure® Hydraulics System (Optional)
- Scrapes clean forward and back dragging
- Increases snow-moving efficiency 30%
Specific Angle and Raise Cylinder Designs
- Lighter Weight with Same Force as Larger Cylinders
Skid Steer Snow Plows
22SKD SERIES - LIGHT COMMERCIAL
26SKD SERIES - LIGHT COMMERCIAL
26RSKD SERIES - COMMERCIAL
29THDSKD SERIES - COMMERCIAL
29HDSKD- COMMERCIAL
29VHDSKD - COMMERCIAL
29RSKD SERIES - COMMERCIAL
32CSKD SERIES - COMMERCIAL
REVHDSKD SERIES - COMMERCIAL
UTV Snow Plows
TRIP EDGE STRAIGHT PLOW SERIES
- When plow is removed only the mounting system remains under the UTV.
- Mounting system provides excellent ground clearance and easy on easy off.
- Integrated swing frame on the blade and reinforced blade structure for long plow life.
V PLOW SERIES
- When plow is removed only the mounting system remains under the UTV.
- Mounting system provides excellent ground clearance and easy on easy off.
Spreaders
4 CU-FT Receiver Spreaders Series
Ideal for treating
sidewalks, driveways and small parking lots, the Sno-Way 4 - Cu. Ft. Receiver
Spreader is the smart solution for small to midsize deicing applications.
The Sno-Way 4 tailgate
salt spreader delivers an all-new performance level to tailgate salt spreading.
No other spreader in its class can match the simplicity of its design, ease of
use or rugged construction. At an empty weight of just 95 pounds, the Sno-Way 4
is perfect for single operator handling. The integrated wheels and tapered Class
III hitch make attaching the spreader a snap.
Features:
- Fully Enclosed Belt Reduction Drive
- Adjustable/Lockable Flow Control Paddle
- Impact Resistant Nylon Roller Wheels
- Sealed Electric Motor
- Polyethylene Hopper Construction
- E-Coat Primer and Powder Coat Paint Finish
- Tapered Receiver Hitch (Class III)
- Vinyl Safety Labels
- Built-In Handles
- High Grade Polyethelene 6" Diameter Spinner
- External Stainless Steel Hardware
- Dual Flip-Up Hopper Lids
- UV Resistant Dual Wall Hopper
6 & 9 CU-FT Receiver Spreaders Series
When you require more salt spreading capacity for larger driveways, access roads or parking lots, look for Sno-Way 6 and 9 - Cu. Ft. Receiver Spreaders to deliver. These high-capacity receiver-mount tailgate salt spreaders provide durability and spreading precision that are second to none.
The Sno-Way 6 and its
big brother Sno-Way 9 – share the same solid features you expect in a Sno-Way
spreader: Poly hopper construction, powder-coated steel frame, tapered Class
III hitch, form-fitting poly lid, 12V electric motor and a simple belt drive.
However, it’s the value added features that make these tailgate salt spreaders
worth every penny.
Features:
- Enclosed Belt Reduction Drive Under Cover
- Form Fitting Poly Hopper Lid With Retainer Strap
- Stainless Steel Hardware
- Exclusive Chunk Buster™ Salt Breakup System
- Fully Adjustable Directional Flow Control Paddles
- High Grade Polyethelene 12" Diameter Spinner
- Impact Resistant Nylon Rollers
- Self-Standing Steel Frame
- Tapered Receiver Hitch (Class III)
- Military Grade Primer & Powder-Coat Paint Finish
- UV Resistant Poly Hopper
- High Exterior Mounted Electric Motor
- Retainer Strap
REVOLUTION V-BOX Spreaders Series
Skid Steer Spreaders
The Sno-Way® SKD10HS skid steer and tractor loader hydraulic salt spreader is the smart solution for fast, efficient deicing. The low profile design provides excellent visibility and is ideal for use in parking lots, loading docks, mall entrances, and walkways.
4 & 6 - cu. ft. UTV Spreaders
4 - Cu. Ft. Model
Ideal for treating sidewalks, driveways and small parking lots, the
Sno-Way 4 - Cu. Ft. Receiver Spreader is the smart solution for small to
midsize deicing applications.
The Sno-Way 4 tailgate salt spreader delivers an all-new performance
level to tailgate salt spreading. No other spreader in its class can match the
simplicity of its design, ease of use or rugged construction. At an empty
weight of just 95 pounds, the Sno-Way 4 is perfect for single operator
handling. The integrated wheels and tapered Class III hitch make attaching the
spreader a snap.
6 - Cu. Ft. Model
When you require more salt spreading capacity for larger driveways,
access roads or parking lots, look for Sno-Way 6 and 9 - Cu. Ft. Receiver
Spreaders to deliver. These high-capacity receiver-mount tailgate salt
spreaders provide durability and spreading precision that are second to none.
The Sno-Way 6 and its big brother Sno-Way 9 – share the same solid features you expect in a Sno-Way spreader: Poly hopper construction, powder-coated steel frame, tapered Class III hitch, form-fitting poly lid, 12V electric motor and a simple belt drive. However, it’s the value added features that make these tailgate salt spreaders worth every penny.