Sno-Way Plows & Spreaders Accessories
Plow Accessories
Snow Plow Emergency Parts Kit
P/N 96109205-22, 26, 29, 29T, 32 Series
P/N 96112515-MegaBlade™ Contractor
P/N 96112517-MegaBlade™ V-Wing™
P/N 96112516-MegaBlade™ Revolution™
Sno-Way's emergency parts kits keep your rig stocked with the most common field service parts in the event of an untimely part replacement or plow repair. All parts are packaged in a durable plastic case (13.5" x 11" x 3.25")
High-Performance Snow Plow Hydraulic Oil (Quart Only)
P/N 96005029
Sno-Way's high-performance, zinc-free hydraulic oil provides superior corrosion resistance and maintains a pour point of -60F. Sno-Way hydraulic oil will not foam or gel in extreme cold weather conditions. Recommended for all Sno-Way truck-mounted snow plows.
High Performance Touch-Up Spray Paint (Black or Silver)
P/N 97100644-Black - Snow Plow
P/N 97100908-Silver - Snow Plow
P/N 97100909-Silver - Spreader
P/N 97101445-12oz. (Yellow MegaBlade™ Plows)
Sno-Way touch-up paint is custom matched to help conceal chips and scrapes and to protect your original Sno-Way equipment from corrosion. All colors are available in 12-oz. aerosol cans.
Anti-Corrosion Compound (3 oz.)
P/N 96108999-3.00 fl. oz.
P/N 96108998-1.25 fl. oz.
Sno-Way's non-conductive compound effectively seals against dirt and moisture and provides maximum protection to electrical switches and contacts. Sno-Way recommends liberal compound application to all exposed electrical components for extended wear life. Tube includes a 1" wide hand hole for convenient shop storage.
Steel Curb Guard
P/N 99100902-26, 29, 29T, 28V, 32 Series
Sno-Way's steel curb guards are 1/2"-thick and measure 15.5" x 6" in size. Each guard features multiple hole patterns to match different Sno-Way cutting edge bolt hole locations. Both guards quickly and easily install in front of the plow cutting edge and ship with complete mount hardware.
Steel Curb Cleaner
P/N 99100901-26, 29, 29T, 28V, 32 Series
Sno-Way's formed steel curb cleaner is 3/8"-thick and measures 5.25" x 8.5" in size. The unique, rounded designs maintains contact with the curb while cleaning in all angled positions and the concave-shaped bottom edge will wear evenly with the main plow cutting edge. This accessory provides over 3.5" of wear before replacement.
E-Z Fit Straight Blades Poly Snow Deflector
Sno-Way's E-Z Fit snow deflector design includes enhanced curvature for optimum snow-rolling and deflection. The 3-piece design is constructed of High Molecular Weight Polyethylene (HMPE), a super-slick material with excellent impact resistance in cold temperatures. Sno-Way's unique, molded reinforcement rib design provides superb rigidity and allows each deflector to overlap one another. The deflector will install on all Sno-Way straight blade widths from 6-feet to 10-feet. Each deflector includes stainless steel mount hardware.
3/8" Steel Cutting Edge (22 series)
Sno-Way offers a 3/8"-thick heavy-duty steel cutting edge for use on 22 Series 80" and 90" snow plows. The 3/8" design provides increased cutting edge durability and longer wear life than the standard 1/4" steel edge.
3/4" Poly Cutting Edge (22 series)
Sno-Way's 22 Series cutting edges are 3/4"-thick and are made of UHMW polyethylene. These durable cutting edges are ideal for snow removal on decorative surfaces, paving stones, cement driveways or an easily scratched surface material.
Plow Shoes
These optional 5-inch cast-iron disc shoes help extended the wear life of the plow cutting edge. Each shoe includes a spacer and multiple washers for simple adjustment. The shoes are easily secured to (and removed from) the plow with locking lynch pins.
4-Sight™ Plow Lighting Kit
P/N 99100969
Sno-Way's 4-Sight™ Plow Lighting uses your existing truck lights and plow lights together to illuminate your work area. Even better, the 4-Sight™ System installs on EIS - equipped plows in 15 minutes or less. With Sno-Way's 4 Sight™ Plow Lighting, you have the option of installing the system to work with either the low or high beams on your truck. Maximize your plow lighting with the all new Sno-Way 4-Sight™ System!
Sno-Way E-Z Switch Wing System
Sno-Way offers the E-Z Switch 3" box wing and 9" scoop wings sold in sets of two. The E-Z switch wing accessories attach to your 29HD, 29VHD, MegaBlade Contractor, 29HDSKD, 29VHDSKD in seconds using two lock pins for added snow moving capabilities. These are not permanent additions so you can easily switch out the proper wing for the proper job in less than 10 seconds. It is the fastest and most convenient system in the industry.
E-Z Fit Skin Insert Kit
Sno-Way offers a poly skin insert kit for use on the Revolution HD, 29HD, 29R and 26 Series plows. You no longer need to have a special blade to have the benefit of a poly blade. You can place the E-Z fit skin insert on your current blade and you have a new poly blade, ready for the snow to slide off. The kit consists of retainer brackets, poly skin with decal and all necessary hardware.
1/2" Steel Cutting Edge ( 29R, 29HD and 26 Series)
Sno-Way offers a 1/2" thick heavy duty steel cutting edge for use on the 29R and 29HD or 26 snow plows. The 1/2" design provides increased cutting edge durability and longer wear life than the standard 1/4" steel edge.
Sno-Way Plow Parka
This long-lasting plow cover is constructed of solution dyed, urethane-coated polyester. It doesn''t fade, is waterproof and prevents unraveling. It includes a heavy duty 1/4 inch diameter bungee cord sewn into the bottom edge for a tight weather resistant fit, along with a vinyl reinforcement patch to protect cover from wearing on the hook up area. The cover takes seconds to install, and provides protection against all of Mother Nature''s elements. A rubber tie down is included that hooks into brass spur grommets for extra holding power.
Spreader Accessoriess
1" Nylon Ratchet Strap Kit
P/N 99100523
Sno-Way's smallest ratchet strap kit is constructed of 1"-wide nylon webbing that has a working load limit of 850 lbs. each. All straps are 5' long and four are provided in each kit. These ratchet straps are recommended for use with Sno_Way electric V-box spreader models.
2" Nylon Ratchet Strap Kit
Safely secure your V-Box spreader to the work truck with these 2" wide nylon webbing ratchet straps. These straps have a working load limit of 3,300 pounds each. The minimum break strength rating is 3X the working load limit. Each kit includes 4 yellow straps. Recommend for use with Sno-Way gas V-Box spreader models.
Universal Spreader Light Kit
Sno-Way's universal spreader light conveniently mounts to the hopper support frame (receiver spreaders) or the engine hood (electric or gas V-box spreaders) and supplies excellent illumination for increased visibility during early morning or night salting applications. Includes mount hardware.
Vibrator Motor Kit
The vibrator motor easily bolts to Sno-Way's 4-, 6- or 9-Cu.-Ft. poly hoppers and electric or gas V-box spreaders. The motor provides consistent agitation of spread material for superior flow to the receiver spreader spinner or V-box conveyor. Each motor ships with complete mount hardware.
Spreader Auxiliary Power Harness
Sno-Way's auxiliary power harness allows you to easily connect additional spreader accessories (see vibrator motor and light kits) to the installed spreader harness on the vehicle without splicing wires. Fast and simple, this harness installs in seconds!
Battery Box & Hold-Down Strap
Constructed of polypropylene for total acid resistance, this battery box is the answer for safe battery storage on Sno-Way gas-powered V-box spreaders. Designed to hold a battery within a 5.5" x 8.25" x 7.875" interior space, this box includes a vented cover and 1.5"-wide nylon hold-down strap. Strap will resist up to 350 pounds of force.
Sno-Way PDE Spreader Cover
Ideal for keeping precipitation from reaching spreader material in the hopper. The Roll Back Retain in Place Cover is a retractable cover that is integrated into the hopper, the cover rolls up and is stowed on the spreader. The cover is durable, reinforced vinyl, and includes dual shock cords with plastic attachment hooks, industrial-strength hem stitching and reinforced corner seams and grommets.